
Add to Cart
Customized 3A Double Head Spring Loaded Pogo Pin For PCB Board
Customized double head pogo pin for PCB board,UPE is a professional manufacturer of pogo pin and pogo pin connector and provide professional POGO PIN customization service.
UPE Pogo Pin Internal Structure according to customer requirements to match suitable one
UPE Pogo Pin External Structure:
Spring-Loaded Pogo Pin parameter performance:
Name of Parts | Parameter performance table | |||
Barrel Materia | Brass | Beryllium copper | Phosphor Bronze |
|
Plunger Material | Brass | Beryllium copper | Phosphor Bronze | Stainless steel |
Spring options | Stainle | Music wire |
|
|
Plating requirements | Gold-Au
| Silver-Ag
| Palladium-Nickel (Pd-Ni) |
|
Rated Current | 1A, 2A, 3A ,5A,15A or 30A (different structures) | |||
Rated Voltage | DC 12V 24V | |||
Contact Resistance | 30mΩ 50mΩ Max. (stillness) | |||
Life test | 50,000 cycles Min. 1000,000 cycles Max | |||
Reflow Temp. | 265°, 4~5sec | |||
POGO PIN Reliability Test | ||||
Retention Force | At rated cycling of 500±50 per hour,50,000 cycles minimum | |||
Humidity | EIA-364-31,Test method II, Condition A Subject mated connectors to relative humidity of 90% to 95%RH and a temperature of 40℃ ± 2℃ relative humidity for 96 hour. | |||
Resistance to Solder Heat
| EIA-364-56,Procedure 5,Level 2 265℃+10/-0℃for 30 to 35 seconds
| |||
Salt Spray
| EIA-364-26,Test condition B Subject mated connectors to 5±1% salt-solution concentration, 35+1℃/-2℃ for 48 hours. | |||
Spring force test
| Normal Force Test Procedure,100g±20g at working height
| |||
Temperature Life
| EIA-364-17,Test method A,condition 4,Test time condition A Subject mated connectors to 85℃± 2℃ for 96 hours. | |||
Solderability
| EIA-364-52 Dip into the 265±5℃, 60/40±5% Sn/pb solder for 4.0~5.0 second | |||
Contact Resistance
| EIA-364-23 Measure the contact resistance with a test current of 100 mA maximum and 20 mV voltage maximum |
Product Application:
1)PCB board;
2)Digital camera/Medical products/ Printer cartridges;
3)Golf handle/ Electric vehicles/ Telephony applications;
4)Cardiac defibrillator/Car charging /Air purifier;
5)LED flat luminaries/LED flash light/Tablet/Laptop/PC ;
6)Power bank/ Digital product/ Small household electrical application;
7)Charging products/Signal transmission products etc
Why do customers choose UPE?
1. Pogo Pin professional customization service
Different products and solutions can be designed according to different customer needs
2. Fast sample production capability
Standard product 2-3 days sample, new custom sample 7 working days, mold opening product 12 days
3. Strict quality control system
The concept of quality first runs through the entire production and inspection process, and strictly controls each process to ensure the quality of customer satisfaction.
4. Processing with imported components
A small number of needle shafts are machined from imported precision lathes, and most of the needle shafts are made of imported cold stamping for higher stability.
5. High-precision test equipment
Provide accurate and precise testing to continuously improve product quality
6. Reasonable cost control procedures
Save costs, eliminate waste, optimize processes, and highlight cost competitiveness
7. Product environmental standards
The product meets the EU ROHS standard and meets halogen
Quality management process:
From material purchasing management, to open mold trail sample, and then to the whole process of production,layer by control inspection, full quality control, to ensure what the supply of products to meet customer needs, to achieve the product qualified rate of more than 98%.